News

Operation Method of CNC Gantry Drilling Machine

Operation Method of CNC Gantry Drilling Machine

2022-03-10 15:44:05

The main function of the cnc gantry drilling machine chip removal device is to discharge the chips from the processing area outside the cnc gantry drilling machine. Chips on cnc gantry drilling and grinding machines are often mixed with cutting fluids. The chip removal device separates the chips from it, and the cnc gantry drilling machine sends them into the chip collection box (car), and the cnc gantry drilling machine and the cutting fluid circulate to the cutting fluid tank.

 

cnc gantry drilling machine

 

For rough machining of blanks, the concern should be how much power the machine tool is, that is, how much is the feed rate at one time. Because the machining of the blank by the cnc gantry drilling machine is rough, the precision is not high, but the efficiency is very high, so the cnc gantry drilling machine is required to have strong performance and a large number of tools. Here's a look at the operating procedures that operators need to remember before starting the operation.

 

Operating procedure

 

  1. Before the operation, check whether the handles and buttons of various parts of the gantry drilling rig are normal, add lubricating oil according to regulations, and operate at low speed for 1-2 minutes.

 

  1. Wear work clothes and work caps before work. Gloves are strictly prohibited during operation.

 

  1. The workpiece should be clamped smoothly. The loading and unloading, tool setting, measurement, speed change, spindle tightening, and cleaning of the CNC gantry drilling machine should be carried out after the CNC gantry drilling machine is stopped.

 

  1. It is forbidden to place tools, measuring tools, workpieces, and other sundries on the workbench.

 

  1. When starting up, check whether the mutual position of the workpiece and the milling cutter is correct.

 

  1. When the cnc gantry drilling machine automatically moves the tool, the handle and the thread need to be disengaged; the worktable cannot go to two positions, and the limit block must be installed firmly.

 

  1. When the CNC gantry drilling machine is running, it is forbidden to clean the machine by hand or cotton yarn. One cannot stand in the tangential direction of the milling cutter, let alone blow the chips with his mouth.

 

  1. The tool holder, tie rod, chuck, and tool should be installed and tightened before starting up, and the spindle should not be used to assist in loading and unloading.

 

  1. After using the cnc gantry drilling machine, turn off the power, clean the machine, place the milling head in the empty position, and move the worktable to the center position.

 

The correct use of cnc gantry drilling machine can reduce the casualties of the machine to the staff and prolong the service life of the milling machine. The normal maintenance of cnc gantry drilling machine can reduce machine failures and improve production efficiency.

 

We are a leading and professional cnc and vmc exporter, supplier, wholesaler, our cnc 3040 3 axises satisfy our customers. And we want to be your long-term partner, any interests, welcome to contact us.

Contact us
* Name

Name can't be empty

* Email

Email can't be empty

Phone

Phone can't be empty

Company

Company can't be empty

* Message

Message can't be empty

Submit