cnc machining center vmc 1060-1160

Gantry machining center consists of table, gantry, ram, tool magazine, accessory head magazine and CNC system, there are fixed beam type (cross beam fixed, table moving or rotating), moving beam type (cross beam moving up and down, table moving back and forth), moving column type (table fixed, gantry frame moving), overhead crane type (table fixed, cross beam moving) and so on.

It is mainly suitable for processing large workpieces and workpieces with complicated shapes.

The structure of vmc 1060 vertical machining

✔️Table

The table of vmc 1060 vertical machining is basically rectangular in shape. The table, bed, column, crossrail and ram are made of Meehaner cast iron, and the inner cavity of the casting is honeycomb type compound arrangement structure with advanced design, all of which are treated by aging and secondary tempering to eliminate the residual internal stress and make the material stable, so as to ensure the stability of workpiece machining accuracy and machine life.

✔️Gantry

The gantry is composed of a crossbeam and two columns. It is divided into three types: fixed crossrail, crossrail locked by the positioning block and crossrail arbitrary lifting and lowering.

✔️Rams

The ram can be divided into open and closed type from the structure. The open structure ram is clamped on the spindle box through the pressure plate, and the cross-sectional area of the ram is large; the closed structure ram is clamped inside the spindle box, and the cross-sectional area of the ram is small.

✔️Tool magazine

The basic types of tool magazine are turret type, wheel drum type and chain length type.

✔️Accessory head magazine

The processing of large and complex parts usually requires many attachment heads. Attachment head according to the workpiece processing requirements for special design, generally divided into right-angle head, extended head, special angle head and head.

✔️CNC system

CNC system generally uses the German SIEMENS company's SINUMERIK840C and 840D or Japan FANUC company's 15, 16 series, CNC axis using full closed-loop control.

✔️Accuracy

The accuracy of the machine tool refers to the original accuracy of the machine tool under the condition that it is not subjected to external load. Accuracy is usually expressed in terms of its opposite - and the deviation between the ideal state (referred to as the error), the smaller the error, the higher the accuracy.

The difference between vmc 1060 vertical machining and vertical machining center

✔️The support structure is different

Vertical machining center refers to the spindle axis and table vertical set of machining center, vertical x, Y axis combined together, Z axis for moving up and down in the column, suitable for doing small precision mold and parts processing. The larger vertical plus has about 4 meters, you can determine the model according to the specific physical processing.

vmc 1060 vertical machining refers to the spindle axis and table vertical set of machining center, gantry Z-axis support structure is not the same, Y-axis horizontal ride between the two columns, increasing the table load, processing range.

✔️Different uses

vmc 1060 vertical machining is mainly suitable for processing large parts. Vertical machining center is mainly suitable for processing plate, disk, mold and small shell type complex parts.

Bottom lines

For more information about vmc 1060 vertical machining center, we are glad to answer for you.