- NO63, XinTai Road, XinMaLian, DaLang Town, Dongguan City, Guangdong province
- info@baofengmachine.com
Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
BAOFENG T800 drilling and tapping center
-
USD 10,000.00 ~ USD 39,999.00/piece
1/ piece (Min. Order)
BF-T800 Vertical tapping machine is featured for high speed rotation, fast and high precision small hole machining and fast tool changing. It could be applied in the processing of small-plate parts, disc-shaped parts and shells, which is widely used in 3C, automotive, watches, electronics, small mold and medical treatment equipment
SPECIFICATION
| Trave | X-axis | mm | 800 |
|---|---|---|---|
| Y-axis | mm | 420 | |
| Z-axis | mm | 300 | |
| Spindle nose to table | mm | 125-425 | |
| Spindle to column | mm | 456 | |
| Worktable | Table size | mm | 900×420 |
| Maximum load on table | kg | 400 | |
| T-slot | No. | 3-14×135 | |
| Controller | Mitsubishi | M80B | |
| Spindle | Driving type | Direct driving | |
| Spindle speed | rpm | 20000 | |
| Spindle taper and specifications | 45°BT30 | ||
| Spindle motor power | kw | 5.5 | |
| 3 axis motor | X/Y/ Z axis motor power | kw | 1.5/1.5/3.0 |
| X/Y/Z rapid feed | m/min | 48/48/48 | |
| Machine accuracy(X/Y/Z) | Positioning accuracy | mm | 0.003/300 |
| Repeat positioning accuracy | mm | 0.002/300 | |
| Machine | Dimension | mm | 2100x2500x2400 |
| Weight | Kg | 3900 |
STANDARD ACCESSORIES
- Mitsubishi-M80B5KW-20000rpm+1.5/1.5/3.0 KW
- Workpiece blowing systems
- Cutting fluid cooling system
- Full Cover for guideways
- Spindle oil coolant
- Handwheel
- Fully enclosed metal cover
- Central lubrication system
- Alarming light
- Working light
- Heat exchanger
- Chip flushing system
- BT30-21T tool magazine
FEATURES
- Strengthened column and base for better rigidity with reasonable lightweight design of worktable, saddle and spindle box to ensures the machine efficiency and rigidity at the same time.
- Top brand screw in X/Y/Z axis with low noise, friction, low temperature rise, lower the extension and deformation, while better acceleration and stability.
- X/Y/Z axis screw with locking pretension design to reduce the accuracy variation caused by thermal expansion.
- Roller linear guide in Z axis with large span design for better rigidity and stability.
- Widen spindle hole to upgrade spindle rigidity and spindle broaching force.
MAIN PARTS BRAND
| NO. | Item | Brand | Origin | Note |
|---|---|---|---|---|
| 1 | Controller system | Mitsubishi | Japan | M80B |
| 2 | Spindle motor | Mitsubishi | Japan | 5.5KW-20000rpm |
| 3 | Three-axis motor | Mitsubishi | Japan | 1.5/1.5/3.0 KW |
| 4 | Spindle | SPeedcn/BF | Taiwan / Joint Venture | BF:BT30-100-20000 |
| 5 | Three axis screw | NSK | Japan | 3616/3016/3216 |
| 6 | Three axis travel | SPeedcn/BF | Taiwan / Joint Venture | 30/30/35 |
| 7 | Bearing | NSK/FAG | Japan/Germany | 4/4/5 |
| 8 | Coupling | R+W / NBK | Germany/Japan | / |
| 9 | Pneumatic system | Mindman | Taiwan | MVSC-220-4E1 |
| 10 | Spindle oil coolant | Rucol | Joint Venture | RCO |
| 11 | Heat exchanger | Rucol | Joint Venture | RC-25 |
| 12 | Cutting cooling motor | Luikar | Joint Venture | LDPB4V/2V-30 |
| 13 | Three point combinations | Mindman | Taiwan | MAP3000 |
| 14 | Pneumatic components | Mindman | Taiwan | AC3000L |
| 15 | Main contactor | Mitsubishi | Japan | SN-65 |
| 16 | Circuit Breaker | Mitsubishi | Japan | NFC60-SMX |
| 17 | Relay | Omron | Japan | RU2S-D24 |
| 18 | Switching power supply | Omron | Japan | S8FS-DC24V |
| 19 | Central lubrication system | Baotn | Joint Venture | BT-C2P |
| 20 | Handwheel | Saiyang | Joint Venture | N-220A |
| 21 | RelayWire (oil resistant wire) | Saiyang | Joint Venture | Special oil-resistant wire |
*The manufacturer reserves the rght to change the brand due to delivery time/technical improvement and other reasons.
APPLICATION
BF-T800 Vertical Tapping Machine
High speed drilling and tapping machine center is featured for high speed rotation, fast and high precision small hole machining and fast tool changing. It could be applied in the processing of small-plate parts, disc-shaped parts and shells, which is widely used in 3C, automotive, watches, electronics, small mold, medical treatment equipment and other industries.
QUALITY SUPERVISION
COMPANY PROFILE
Dongguan Baoke Precision Machinery Co, Ltd is co-founded by Taiwan Baofeng and elites in Mainland China who engage in developing, manufacturing, selling, and service CNC machine centers. Our mainland manufacturing base is established in 2002, Baofeng has become a leading company for high-end machine center manufacturers in china as well as an integrated intelligent solution provider.
We have 3 factories and we mainly produce various vertical machining centers (near guideway and square guideway), high-speed engraving and milling machines, double column machining center, and CNC tapping center.
At present, Baofeng has a complete sales and after-sales service team across the country, but we try to bring our philosophy to the world and become a strong and competitive global player. We are now looking for partners overseas to build our dealer's network and at the same time prepare our local representative office.
CERTIFICATES
CASE CUSTOMER
PACKING & SHIPPING
FAQ
1. How can I choose the most suitable machines?
A: Please tell me your specifications, we can choose the best model for you, or you can choose the exact model. You can also send us the products drawing, we will choose the most suitable machines for you.
2. What're the main products of your company?
A: We specialized in all kinds of machines, such as Vertical Machining Center, Double Column Machining Center, Drilling and Tapping CNC Machining Center, Engraving and Milling Center, etc.
3. Where is our factory located? How can I visit there?
A: Our factory is located in Dongguan City, Guangdong Province, China. You are warmly welcome to visit us.
4. What are your trade terms?
A: FOB, CFR, and CIF are all acceptable.
5. What are the Payment Terms?
A: Generally, T/T,30% initial payment when order,70% balance payment before shipment (This can be negotiated specifically); Irrevocable LC at sight.
6. What's the MOQ?
A: 1 set.
